Keep Your Water Heating Bill Low This Winter

January 28, 2016

 

Winter has arrived, which means harsh temperatures and pricey utility bills. Water heating is the second largest energy expense, accounting for about 18% of your household’s utility bills. The good news is that you can make small, easy tweaks to lower those costs and conserve energy at the same time. Read on for ideas on how to cut down on hot water use this winter.

Reduce your time in the shower.

With the temperature dropping outside, it’s tempting to take long, hot showers. But did you know that water comes through your home’s plumbing at an average of two gallons per minute? Think of all the water you’re paying to heat up! Keep your showers short and bundle up with a big towel and fluffy robe afterward.

Lower the temperature.

Water heaters sometimes come from the manufacturer with the temperature set at 140 degrees Fahrenheit. The Federal Department of Energy recommends keeping the thermostat on your water heater set to 120 degrees. For every 10-degree reduction in temperature, you can save 3-5% on your water heating costs.

Insulate your tank.

Help your water heater preserve its warmth by insulating the storage tank. This will prevent the water from cooling down and forcing the unit to work overtime. Make sure you follow the manufacturer’s recommendations when installing insulation so you don’t accidentally cover up the thermostat or burner compartment.

Install a timer.

If you have an electric heater, install a timer that turns off at night or times when you don’t use it. You can also use the timer to turn off the water heater during your utility’s peak demand times. A timer is relatively inexpensive and it saves money on your water heating bill over time. For gas heaters, you can keep the temperature turned down most of the time and manually turn the temperature up about a half hour before you need it.

Flush your water heater annually.

There are several benefits to flushing the sediment from your hot water heater at least once a year. By flushing your water heater, you’ll have more room in your tank to store hot water. You’ll also keep bacteria from growing in your tank. Most importantly, you’ll save money on your utility bill because your tank will operate more efficiently.

Try out these tips for saving energy and see how much you can save. If your water heater is old, it might be a good idea to look into getting a new one. Today, new water heaters are more energy efficient. If you need service for your water heater or plumbing, give Eastern Plumbing a call.